2017년 2월 18일 토요일

1.5W Solar Panel 81*137



1.5W Solar Panel 81*137

Introduction

This is a custom solar panel, which mates directly with many of our development boards and has a high efficiency at 16%. Unit has a clear epoxy coating with hard-board backing. Robust sealing for out door applications!

Specification

  • PCB size : 137811.5 mm
  • Monolithic : 78*11.14 mm
  • Efficiency : 16%
  • Voltage:5.5V;
  • Current:270mA
  • Power:1.5W
  • Connector: 2.0mm JST
  • Type:156 Two line;
  • PCB Material : all Glass fiber
  • PCB requirements : positive
  • Quality requirements :
    • flatness less than 0.1mm
    • clean, does not allow to have the scratch
    • take off paint the phenomenon, such as a hole does not allow to have the deviation
  • Note : tolerance Positive and negative 0.1mm
  • Name: PET laminated (1137*81)
  • Arrangement:1*11(series)NO spacing posted artical black;

Help us make it better

Thank you for choosing Seeed. A couple of months ago we initiated a project to improve our documentation system. What you are looking at now is the first edition of the new documentation system. Comparing to the old one, here is the progresses that we made:
  • Replaced the old documentation system with a new one that was developed from Mkdocs, a more widely used and cooler tool to develop documentation system.
  • Integrated the documentation system with our official website, now you can go to Bazaar and other section like Forum and Community more conveniently.
  • Reviewed and rewrote documents for hundreds of products for the system’s first edition, and will continue migrate documents from old wiki to the new one.
An easy-to-use instruction is as important as the product itself. We are expecting this new system will improve your experience when using Seeed’s products. However since this is the first edition, there are still many things need to improve, if you have any suggestions or findings, you are most welcome to submit the amended version as our contributor or give us suggestions in the survey below, Please don’t forget to leave your email address so that we can reply.
Happy hacking

0.5w Solar Panel 55*70



0.5w Solar Panel 55*70

Introduction

This is a custom solar panel, which mates directly with many of our development boards and has a high efficiency at 17%. Unit has a clear epoxy coating with hard-board backing. Robust sealing for out door applications!

Specification


PETPackage
Typical peak power0.55W
Voltage at peak power5.5v
Current at peak power100mA
Length70 mm
Width55 mm
Depth1.5 mm
Weight17g
Efficiency17%
Wire diameter1.5mm
Connector2.0mm JST

Hardware Installation


See Also


Help us make it better

Thank you for choosing Seeed. A couple of months ago we initiated a project to improve our documentation system. What you are looking at now is the first edition of the new documentation system. Comparing to the old one, here is the progresses that we made:
  • Replaced the old documentation system with a new one that was developed from Mkdocs, a more widely used and cooler tool to develop documentation system.
  • Integrated the documentation system with our official website, now you can go to Bazaar and other section like Forum and Community more conveniently.
  • Reviewed and rewrote documents for hundreds of products for the system’s first edition, and will continue migrate documents from old wiki to the new one.
An easy-to-use instruction is as important as the product itself. We are expecting this new system will improve your experience when using Seeed’s products. However since this is the first edition, there are still many things need to improve, if you have any suggestions or findings, you are most welcome to submit the amended version as our contributor or give us suggestions in the survey below, Please don’t forget to leave your email address so that we can reply.
Happy hacking