3.6V Micro hydro generator

Introduction

http://www.seeedstudio.com/depot/images/large/product/mhg_01_LRG.jpg
Micro hydro power is clean, renewable energy. Here is a G 1/2 micro hydro generator which can supply stably output voltage and output current with the help of one voltage stabilizing circuit and one rechargeable battery. We can install it at home to save household energy, like using spray shower to light LEDs etc.
Pressure and Flow diagram
Flow and Output voltage Diagram
Note
This module has added one voltage stabilizing circuit and one rechargeable battery, output voltage is stably 3.6v and output current is stably 300mA.
Flow and Output voltage Diagram

Specification


Weight165 g
Output voltage3.6V
Battery Capacity300mA
Maximum working pressure1.75 MPa
Working pressure0~1.75MPa
Working temperature0~110°C
Maximum30mins at 110 °C
Recommend flow rate range1.5~20 l/min(Pressure 0.05-0.2mpa)
Installation Methoddirection of arrow
Materialnylon/glass fiber,Polyformaldehyde
Size of the input and output openings0.8inch

Mechanic Dimensions


Usage


Hardware Installation

Help us make it better

Thank you for choosing Seeed. A couple of months ago we initiated a project to improve our documentation system. What you are looking at now is the first edition of the new documentation system. Comparing to the old one, here is the progresses that we made:
  • Replaced the old documentation system with a new one that was developed from Mkdocs, a more widely used and cooler tool to develop documentation system.
  • Integrated the documentation system with our official website, now you can go to Bazaar and other section like Forum and Community more conveniently.
  • Reviewed and rewrote documents for hundreds of products for the system’s first edition, and will continue migrate documents from old wiki to the new one.
An easy-to-use instruction is as important as the product itself. We are expecting this new system will improve your experience when using Seeed’s products. However since this is the first edition, there are still many things need to improve, if you have any suggestions or findings, you are most welcome to submit the amended version as our contributor or give us suggestions in the survey below, Please don’t forget to leave your email address so that we can reply.
Happy hacking