Teleduino

Introduction

Teleduino converts your ethernet enabled Arduino into a powerful and versatile tool for interacting with devices over the internet. Not only that, but it makes it quick and easy.

Teleduino is now available for the Arduino Mega range of boards!

Once your Teleduino is configured, it automatically connects itself to the Teleduino server when powered on. The Teleduino server translates instructions received from the internet into actions on the Teleduino device.

Using the Teleduino platform, you can perform the following tasks with your Arduino via the simple web service:

⦁ Reset, ping, get uptime, get free memory.

⦁ Define pin modes, set digital outputs, set analog outputs, read digital inputs, read analog inputs, or read all inputs with a single API call.

⦁ Define up to 2 'banks' (4 for the Mega) of shift registers. Each 'bank' can contain up to 32 cascaded shift registers, giving a total of 512 digital outputs (1024 for the Mega).

⦁ Shift register outputs can be set, or merged, and expire times can be set on merges (you could set an output(s) high for X number of milliseconds).

⦁ Define, and read and write from serial port (4 for the Mega).

⦁ Read and write from EEPROM.

⦁ Define and position up to 6 servos (48 for the Mega).

⦁ Interface with I2C (TWI) sensors and devices.

⦁ Set preset values for the above functions, which get set during boot. 

Preset values are stored in the first 178 bytes of the EEPROM (413 for the Mega).